<rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:dcterms="http://purl.org/dc/terms/">
<rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22198">
    <dcterms:title><![CDATA[Molding plane with concave-shaped blade. 1 5/8&quot; round cut.]]></dcterms:title>
    <dcterms:description><![CDATA[molding plane--wood is chipped near the blade edge in the back of the plane. Beech wood. by H.Hills, Springfield, MA. L.N. Fay, owner]]></dcterms:description>
    <dcterms:date><![CDATA[1845-51]]></dcterms:date>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22199">
    <dcterms:title><![CDATA[Molding plane with curved circular open area in base near blade. ]]></dcterms:title>
    <dcterms:description><![CDATA[Molding plane--very small holes have eroded the wood in three places on one side. many scratches. Opening is wider on one side. 1.25” rabbet cut. Beech wood. Appears to be mechanic made.]]></dcterms:description>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22200">
    <dcterms:title><![CDATA[Molding plane with very thin base, 0.75&quot; rabbet cut]]></dcterms:title>
    <dcterms:description><![CDATA[molding plane with traces of green paint found on the bottom. Beech wood. by D. Colton &amp; B. Sheneman, Philadelphia. I. McNutt, owner unusual side boxing]]></dcterms:description>
    <dcterms:date><![CDATA[1846-1852]]></dcterms:date>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22201">
    <dcterms:title><![CDATA[Molding plane with concave blade, 0.75&quot; round cut]]></dcterms:title>
    <dcterms:description><![CDATA[molding plane; on the side where the blade is not exposed at all, there are curved surface scratches revealing a lighter wood below. this is in the upper right hand corner. Beech wood. by H. Hills, Springfield, MA.]]></dcterms:description>
    <dcterms:date><![CDATA[1845-1851]]></dcterms:date>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22202">
    <dcterms:title><![CDATA[Molding plane with concave blade. 7/8&quot; round cut.]]></dcterms:title>
    <dcterms:description><![CDATA[on side up without blade exposed, there are two cuts into the wood at the same level, of the same size and shape. by H.Hills, Springfield, MA. molding plane made of Beech wood.]]></dcterms:description>
    <dcterms:date><![CDATA[1845-51]]></dcterms:date>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22203">
    <dcterms:title><![CDATA[Molding plane with very narrow concave blade, 0.25&quot; side bead]]></dcterms:title>
    <dcterms:description><![CDATA[molding plane with many knicks and scratches. smudge of white paint visible on non-blade side. blade is very rusty. beech wood. boxed.by W. Parkes, Birmingham, England]]></dcterms:description>
    <dcterms:date><![CDATA[1818-21]]></dcterms:date>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22204">
    <dcterms:title><![CDATA[Molding plane with concave blade.]]></dcterms:title>
    <dcterms:description><![CDATA[solid back of the plane extends lower than area with blade. sash cut. Grooves are lightly embedded in the side near the blade. There is a deep nick in the side near the blade. Beech wood. by Marshall of Glasgow, Scotland.]]></dcterms:description>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22205">
    <dcterms:title><![CDATA[Light wood molding plane without metal blade. 0.25&quot; bead cut.]]></dcterms:title>
    <dcterms:description><![CDATA[horizontal black smudges are on the solid back of the plane. Beech wood. Catalog # 123. by H. Chapin]]></dcterms:description>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22206">
    <dcterms:title><![CDATA[Molding plane, 3/8&quot; bead cut]]></dcterms:title>
    <dcterms:description><![CDATA[molding plane made of beech wood. by D. Colton &amp; B. Sheneman, Philadelphia Excellent double boxing. logos: I. McNutt 3/8 I. McNutt D.COLTON and B. SHENEMAN No. 297 MARKET ST PHILA. I. McNUTT WARRANTED]]></dcterms:description>
    <dcterms:date><![CDATA[c. 1846-52]]></dcterms:date>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22207">
    <dcterms:title><![CDATA[Molding plane with very narrow concave blade. i.e., 3/16&quot; bead cut]]></dcterms:title>
    <dcterms:description><![CDATA[faded faint yellow paint smudge on solid back of molding plane. beech wood, bored with boxwood. I. McNutt, wonder D. Colton &amp; B. Sheneman, makers D.COLTON and B. SHENEMAN No. 297 MARKET ST PHILA. I. McNUTT WARANTED]]></dcterms:description>
    <dcterms:date><![CDATA[1846-1852]]></dcterms:date>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22208">
    <dcterms:title><![CDATA[Molding plane with slighlty concabe blade, sash cut.]]></dcterms:title>
    <dcterms:description><![CDATA[molding plane made of beech wood. by Marshall, Glasgow, Scotland D. Walker and C. Taylor, owners]]></dcterms:description>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22209">
    <dcterms:title><![CDATA[Molding plane with concave metal blade. 5/8&quot; bead cut.]]></dcterms:title>
    <dcterms:description><![CDATA[beech wood molding plane. by H. Chapin, Pine Meadow, CT Boxed, with front of box missing. Catalog # 123. J.B. Rufe, owner]]></dcterms:description>
    <dcterms:date><![CDATA[c. 1825-1860]]></dcterms:date>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22210">
    <dcterms:title><![CDATA[Molding plane with no metal blade. 0.25&quot; blade cut.]]></dcterms:title>
    <dcterms:description><![CDATA[molding plane; There are traces of green paint on the bottom. Beech wood. by Bennett B. Burley of Glasgow, Scotland. D. Walker, owner. logos: 1/4 D. WALKER other side: D. WALKER three B&#039;s in a circle BENNET &amp; BURLEY GLASGOW WARANTED]]></dcterms:description>
    <dcterms:date><![CDATA[late 19th C.]]></dcterms:date>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22211">
    <dcterms:title><![CDATA[Molding plane with concave blade, 5/8&quot; round cut]]></dcterms:title>
    <dcterms:description><![CDATA[molding plane with dot of green paint near bottom center on solid back. wood shavings trapped near blade. beech wood. by H. Hills, Springfield, MA]]></dcterms:description>
    <dcterms:date><![CDATA[1845-51]]></dcterms:date>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22212">
    <dcterms:title><![CDATA[Molding plane with very narrow concave blade. 3/16&quot; bead cut.]]></dcterms:title>
    <dcterms:description><![CDATA[molding plane made of beech wood. by Marshall of Glasgow, Scotland boxed with boxwood. wedge shows crushing type damage.]]></dcterms:description>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22213">
    <dcterms:title><![CDATA[Molding plane with convex blade and bottom edge. 3/4&quot; hollow cut.]]></dcterms:title>
    <dcterms:description><![CDATA[molding plane beech wood. L.N. Fay, owner H. Hills, Springfield, MA, maker.]]></dcterms:description>
    <dcterms:date><![CDATA[1845-51]]></dcterms:date>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22214">
    <dcterms:title><![CDATA[Molding plane with concave metal blade. 5/8&quot; bead cut.]]></dcterms:title>
    <dcterms:description><![CDATA[many cuts and nicks all over molding plane plane. beech wood, boxed with Boxwood. by Marshall of Glasgow, Scotland. logos: MARSHALL other side: GLASGOW D. WALKER 5/8 D. WALKER WARANTED]]></dcterms:description>
    <dcterms:date><![CDATA[c. 1883-1904]]></dcterms:date>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22215">
    <dcterms:title><![CDATA[Molding plane with convex blade and base 7/8&quot;]]></dcterms:title>
    <dcterms:description><![CDATA[molding plane--blade is very rusty. beech wood. by H. Hills, Springfield, MA L.N. Fay, owner]]></dcterms:description>
    <dcterms:date><![CDATA[1845-51]]></dcterms:date>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22216">
    <dcterms:title><![CDATA[Molding plane with narrow convex blade. 1/2&quot; hollow cut.]]></dcterms:title>
    <dcterms:description><![CDATA[more than half of the top of the base is a variety of dark shades. the lower part is light wood. beech wood. by H. Hills, Springfield, MA. L.N. Fay, owner molding plane]]></dcterms:description>
    <dcterms:date><![CDATA[1845-1851]]></dcterms:date>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22217">
    <dcterms:title><![CDATA[Molding plane with very narrow concave blade, 1/2&quot; round cut]]></dcterms:title>
    <dcterms:description><![CDATA[molding plane made of Beech wood by H.Hills, Springfield, MA]]></dcterms:description>
    <dcterms:date><![CDATA[1845-1851]]></dcterms:date>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22218">
    <dcterms:title><![CDATA[Molding plane with convex blade with straight sides. 5/8&quot; hollow cut.]]></dcterms:title>
    <dcterms:description><![CDATA[dark reddish brown spot on upper portion of blade-side base. beech wood. by Burnham &amp; Fox Co., Amherst, MA molding plane]]></dcterms:description>
    <dcterms:date><![CDATA[1842-4]]></dcterms:date>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22219">
    <dcterms:title><![CDATA[Handled molding plane with 1 1/16&quot; nosing cut jack plane]]></dcterms:title>
    <dcterms:description><![CDATA[jack plane used for rough, preliminary planing. 1 1/16&quot; nosing cut convex edge of blade enabled it to cut deeply. gold / brown paint is smeared on one side of the stock (base). small nail near base of handle. Beech wood. by Samuel Bibighaus, Philadelphia on top of blade: MOTTRAM on one side: G.F. McDOWELL&#039;S on other side: S.H. BIBIGHAUS No. 311 WILLOW ST. G.F. McDOWELL&#039;S]]></dcterms:description>
    <dcterms:date><![CDATA[1850&#039;s]]></dcterms:date>
    <dcterms:type><![CDATA[jack plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22220">
    <dcterms:title><![CDATA[Handled match plane for groving. rabbet plane]]></dcterms:title>
    <dcterms:description><![CDATA[Thin sheet of metal reinforces area near blade- attached with 5 large flat nails. Wedge arms. Beech wood. Replacement wedge. rabbet plane]]></dcterms:description>
    <dcterms:type><![CDATA[rabbet plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22221">
    <dcterms:title><![CDATA[Large key with old tag attached.]]></dcterms:title>
    <dcterms:description><![CDATA[key--Handprinted on accompanying tag: &quot;FIRST CONGRESS HALL&quot; The handle of the key has an 8-shaped opening.]]></dcterms:description>
    <dcterms:type><![CDATA[key]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22222">
    <dcterms:title><![CDATA[Large metal key with thin oval handle.]]></dcterms:title>
    <dcterms:description><![CDATA[There is a chip at the end of the key. no tag.]]></dcterms:description>
    <dcterms:type><![CDATA[key]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22223">
    <dcterms:title><![CDATA[Metal key with thin oval handle]]></dcterms:title>
    <dcterms:description><![CDATA[metal key]]></dcterms:description>
    <dcterms:type><![CDATA[key]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22224">
    <dcterms:title><![CDATA[Thick metal key, hollow]]></dcterms:title>
    <dcterms:description><![CDATA[There are three almost complete circles attached to the end of the key.]]></dcterms:description>
    <dcterms:type><![CDATA[key]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22225">
    <dcterms:title><![CDATA[Gullwing cabinet scraper, molding curve]]></dcterms:title>
    <dcterms:description><![CDATA[Blade on the molding curve is very rusty, not sharp. wooden body. steel blade, blade possibly made from an old saw blade. excellent form.]]></dcterms:description>
    <dcterms:date><![CDATA[late 19th C.]]></dcterms:date>
    <dcterms:type><![CDATA[smoothing curve]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22226">
    <dcterms:title><![CDATA[Heavy metal long strap hinge with rivets]]></dcterms:title>
    <dcterms:description><![CDATA[rivets have wide flat bases. strap hinge has tapering width. very rusty.]]></dcterms:description>
    <dcterms:type><![CDATA[strap hinges]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22227">
    <dcterms:title><![CDATA[Lightweight long thin carved piece of wood]]></dcterms:title>
    <dcterms:description><![CDATA[very lightweight dark wood. pieces are broken off at each end. Initial length and purpose of object unknown]]></dcterms:description>
    <dcterms:type><![CDATA[decorative wooden piece]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22228">
    <dcterms:title><![CDATA[Plane knife with large-headed screw coming through it.]]></dcterms:title>
    <dcterms:description><![CDATA[plane knife; very rusty in the blade area. steel. 1 of 4 in the collection of teh Carpenters&#039; Company which is inscribed by W.BUTCHER]]></dcterms:description>
    <dcterms:type><![CDATA[plane knife]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22229">
    <dcterms:title><![CDATA[Long plane knife with no screws or open areas]]></dcterms:title>
    <dcterms:description><![CDATA[plane knife; cast steel. 1 of 4 inscribed by W.BUTCHER]]></dcterms:description>
    <dcterms:type><![CDATA[plane knife]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22230">
    <dcterms:title><![CDATA[Plane knife with large key hole-like opening in center]]></dcterms:title>
    <dcterms:description><![CDATA[plane knife; cast steel. 1 of 4 plane knives inscribed by W.BUTCHER]]></dcterms:description>
    <dcterms:type><![CDATA[plane knife]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22231">
    <dcterms:title><![CDATA[Plane knife with large key hole-shaped opening]]></dcterms:title>
    <dcterms:description><![CDATA[plane knife; cast steel. 1 of 4 plane knives inscribed by W.BUTCHER]]></dcterms:description>
    <dcterms:type><![CDATA[plane knife]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22232">
    <dcterms:title><![CDATA[Plane knife with large key hole-shaped opening]]></dcterms:title>
    <dcterms:description><![CDATA[plane knife; cast steel. several rust spots. logo with some letters undecipherable, the right half says: Tool Co. MADE FROM BUTCHERS CAST STEEL]]></dcterms:description>
    <dcterms:type><![CDATA[plane knife]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22233">
    <dcterms:title><![CDATA[Plane knife with large key hole-shaped opening in center]]></dcterms:title>
    <dcterms:description><![CDATA[logo: ISAAC GREAVES WARANTED CAST STEEL logo includes what appears to be a coat of arms plane knife]]></dcterms:description>
    <dcterms:type><![CDATA[plane knife]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22234">
    <dcterms:title><![CDATA[Plane knife; 2 pieces are connected by a large-headed screw]]></dcterms:title>
    <dcterms:description><![CDATA[cast steel plane knife some discoloration and rusting.]]></dcterms:description>
    <dcterms:type><![CDATA[plane knife]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22235">
    <dcterms:title><![CDATA[Plane knife; 2 pieces are held together by a large-headed screw.]]></dcterms:title>
    <dcterms:description><![CDATA[cast steel plane knife very rusty]]></dcterms:description>
    <dcterms:type><![CDATA[plane knife]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22236">
    <dcterms:title><![CDATA[Plane knife with angled blade.]]></dcterms:title>
    <dcterms:description><![CDATA[blade at bottom is at an angle from the rest of the plane knife. very rusty. no inscriptions visible]]></dcterms:description>
    <dcterms:type><![CDATA[plane knife]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22237">
    <dcterms:title><![CDATA[Small rusty plane knife with large-headed screw attached]]></dcterms:title>
    <dcterms:description><![CDATA[small rusty plane knife with large-headed screw attached]]></dcterms:description>
    <dcterms:type><![CDATA[plane knife]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22238">
    <dcterms:title><![CDATA[Plane knife with hole in the center where a screw apparently once was]]></dcterms:title>
    <dcterms:description><![CDATA[very rusty plane knife no visible inscriptions]]></dcterms:description>
    <dcterms:type><![CDATA[plane knife]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22239">
    <dcterms:title><![CDATA[Rusty iron cut nail]]></dcterms:title>
    <dcterms:description><![CDATA[small thin flat head nail. rectangular stem. blunt point.]]></dcterms:description>
    <dcterms:type><![CDATA[cut nail]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22240">
    <dcterms:title><![CDATA[Rusty iron cut nail]]></dcterms:title>
    <dcterms:description><![CDATA[long thin irregularly shaped cut nail rectangular stem. blunt point. thin flat head.]]></dcterms:description>
    <dcterms:type><![CDATA[cut nail]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22241">
    <dcterms:title><![CDATA[Rusty handwrought nail]]></dcterms:title>
    <dcterms:description><![CDATA[hand wrought nail; 1 of a set of 6, each one of a different length and width.]]></dcterms:description>
    <dcterms:type><![CDATA[wrought nail]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22242">
    <dcterms:title><![CDATA[Rusty handwrought nail]]></dcterms:title>
    <dcterms:description><![CDATA[hand wrought nail; 1 of a set of 6. stem was obviously formed by hand, because of inconsistency of width. point is flat and wide, not sharp.]]></dcterms:description>
    <dcterms:type><![CDATA[wrought nail]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22243">
    <dcterms:title><![CDATA[Rusty handwrought iron nail]]></dcterms:title>
    <dcterms:description><![CDATA[hand wrought nail; 1 of a set of 6. point is flat but sharp.]]></dcterms:description>
    <dcterms:type><![CDATA[wrought nail]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22244">
    <dcterms:title><![CDATA[Rusty handwrought nail]]></dcterms:title>
    <dcterms:description><![CDATA[1 of a set of 6. area near the point is very irregular, suggesting that it has been knocked off. hand wrought nail;]]></dcterms:description>
    <dcterms:type><![CDATA[wrought nail]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22245">
    <dcterms:title><![CDATA[Rusty handwrought nail]]></dcterms:title>
    <dcterms:description><![CDATA[hand wrought nail; 1 of a set of 6. point is flat and irregularly shaped.]]></dcterms:description>
    <dcterms:type><![CDATA[wrought nail]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22246">
    <dcterms:title><![CDATA[Rusty handwrought nail]]></dcterms:title>
    <dcterms:description><![CDATA[hand wrought nail; 1 of a set of 6. stem is much shorter than the rest of the set. much more regularly shaped than the rest of the set.]]></dcterms:description>
    <dcterms:type><![CDATA[wrought nail]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22247">
    <dcterms:title><![CDATA[Silver metal paring chisel]]></dcterms:title>
    <dcterms:description><![CDATA[paring chisel: 1) pushed to smooth a rough cut made by the forming chisel. used as a finishing tool. 2) side view: flat and thin 3) some decoloration 4) incision goes from top of blade along back of the chisel for a few inches 5) sharp blade]]></dcterms:description>
    <dcterms:type><![CDATA[paring chisel]]></dcterms:type>
</rdf:Description></rdf:RDF>