<rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:dcterms="http://purl.org/dc/terms/">
<rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22664">
    <dcterms:title><![CDATA[Wooden board with removable edge]]></dcterms:title>
    <dcterms:description><![CDATA[wooden board with removal edge on narrow end; no markings]]></dcterms:description>
    <dcterms:type><![CDATA[wooden board]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22652">
    <dcterms:title><![CDATA[Wooden box made from Washington&#039;s mantel]]></dcterms:title>
    <dcterms:description><![CDATA[James Stewart (elected 1833; deceased 1856) was hired to demolish the house at 6th and Market street used by George Washington as the first White House. 524-30 Market Street. An inscription inside the lid states that the wood used for this box came from the mantel in Washington&#039;s bed chamber. The decorative carved design on thee top is painted white. An article from the newspaper and a typed copy gives details for the box as told by Stewarts daughter Martha who was custodian of the Hall in the last quarter of 19th century.]]></dcterms:description>
    <dcterms:date><![CDATA[c.1845]]></dcterms:date>
    <dcterms:type><![CDATA[wooden Washington Box]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22176">
    <dcterms:title><![CDATA[Wooden boxlock with hand-printed label ]]></dcterms:title>
    <dcterms:description><![CDATA[wooden boxlock--unvarnished wood piece with small holes in upper and lower left corner and in right center. keyhole in bottom center. Back reinforced in spots with thin metal pieces and nails.]]></dcterms:description>
    <dcterms:type><![CDATA[wooden boxlock]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22054">
    <dcterms:title><![CDATA[Wooden chest]]></dcterms:title>
    <dcterms:description><![CDATA[Wooden chest; Faded blue paint on side panels, and interior, two iron handles, lock, inside- 3 bottom partitions. Two removable drawers which slide into groove near top. 3 metal wheels. Multiple scratches throughout.]]></dcterms:description>
    <dcterms:date><![CDATA[1705]]></dcterms:date>
    <dcterms:type><![CDATA[chest]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22572">
    <dcterms:title><![CDATA[Wooden compass]]></dcterms:title>
    <dcterms:description><![CDATA[mahogany with brass fittings.]]></dcterms:description>
    <dcterms:type><![CDATA[compass]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22405">
    <dcterms:title><![CDATA[Wooden drawing box with inset wooden top]]></dcterms:title>
    <dcterms:description><![CDATA[Wooden drawing box; includes manuscript architectural drawing.]]></dcterms:description>
    <dcterms:type><![CDATA[drawing box with board]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22417">
    <dcterms:title><![CDATA[Wooden Drill Brace with Gold Metal Trim.]]></dcterms:title>
    <dcterms:description><![CDATA[Drill Brace with Gold Metal Trim. Sheffield style brass plated brace with button chuck.]]></dcterms:description>
    <dcterms:date><![CDATA[late 19th C.]]></dcterms:date>
    <dcterms:type><![CDATA[drill brace]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22328">
    <dcterms:title><![CDATA[Wooden drill of rough finish medium tone wood, with cut nails and thick iron band holding drill together on one side. large wooden knob on opposite side.]]></dcterms:title>
    <dcterms:description><![CDATA[wooden drill, soft wood. iron ring holds chuck to main body of brace. one bit with broken cutter. leather gaskets at pad. nice form, unusual chuck attachment.]]></dcterms:description>
    <dcterms:date><![CDATA[18th C.]]></dcterms:date>
    <dcterms:type><![CDATA[large wooden drill]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22318">
    <dcterms:title><![CDATA[Wooden fiister: a rabbeting plane with an adjustable fence, beech wood]]></dcterms:title>
    <dcterms:description><![CDATA[Wooden filister that appears American made, missing nicker and nicker wedge]]></dcterms:description>
    <dcterms:type><![CDATA[filister]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22082">
    <dcterms:title><![CDATA[Wooden flagpole]]></dcterms:title>
    <dcterms:description><![CDATA[Long wooden flagpole in three sections. Two wooden sections screwed together at midpoint- screw-on eagle. Eagle is of brass-colored metal with spread wings. 2 hooks.]]></dcterms:description>
    <dcterms:type><![CDATA[flagpole]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22084">
    <dcterms:title><![CDATA[Wooden flagpole]]></dcterms:title>
    <dcterms:description><![CDATA[Three-section flagpole: 2 long wooden sections screwed at midpoint. Finial shaped as a spade in a brass-colored metal.]]></dcterms:description>
    <dcterms:date><![CDATA[c. 1940]]></dcterms:date>
    <dcterms:type><![CDATA[flagpole]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22091">
    <dcterms:title><![CDATA[Wooden flagpole]]></dcterms:title>
    <dcterms:description><![CDATA[Three-section flagpole: 2 long wooden sections screwed at mid-section. Finial shaped as swooping eagle in brass-like metal.]]></dcterms:description>
    <dcterms:date><![CDATA[c. 1912]]></dcterms:date>
    <dcterms:type><![CDATA[flagpole]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22086">
    <dcterms:title><![CDATA[Wooden flagpole.]]></dcterms:title>
    <dcterms:description><![CDATA[Three-section flagpole: 2 long wooden sections screwed at midpoint. Finial shaped as spade in brass-colored metal. Similar to CCCCP-030a.]]></dcterms:description>
    <dcterms:date><![CDATA[c. 1909]]></dcterms:date>
    <dcterms:type><![CDATA[flagpole]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22089">
    <dcterms:title><![CDATA[Wooden flagpole.]]></dcterms:title>
    <dcterms:description><![CDATA[Three-section flagpole : 2 long wooden sections screwed at mid-section. Finial shaped as a spade in brass-like metal. ]]></dcterms:description>
    <dcterms:date><![CDATA[c. 1909]]></dcterms:date>
    <dcterms:type><![CDATA[flagpole]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22092">
    <dcterms:title><![CDATA[Wooden flagpole.]]></dcterms:title>
    <dcterms:description><![CDATA[Wooden flagpole, in one piece, with a band of metal at mid-section. Top is broken and decorative piece seems to be missing. On metal band, the following inscription: &quot;Presented to the Carpenters&#039; Company of the City and County of Philadelphia in commemoration of the 150th anniversary of the 1st Continental Congress of America Valley Forge, PA. Sept. 26, 1924&quot;]]></dcterms:description>
    <dcterms:date><![CDATA[c. 1924]]></dcterms:date>
    <dcterms:type><![CDATA[flagpole]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22433">
    <dcterms:title><![CDATA[Wooden fore plane]]></dcterms:title>
    <dcterms:description><![CDATA[Fore plane; beech wood. closed handled. no legible maker&#039;s name. Missing wedge.]]></dcterms:description>
    <dcterms:type><![CDATA[fore plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22435">
    <dcterms:title><![CDATA[Wooden fore plane]]></dcterms:title>
    <dcterms:description><![CDATA[fore plane; beech wood. closed handle. cutter missing and wedge missing. toe of body worn. Sandusky Tool Co., manufacturer]]></dcterms:description>
    <dcterms:type><![CDATA[fore plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22646">
    <dcterms:title><![CDATA[Wooden gabbers found in kitchen in 1990s]]></dcterms:title>
    <dcterms:description><![CDATA[nothing more known]]></dcterms:description>
    <dcterms:type><![CDATA[wooden grabbers]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22167">
    <dcterms:title><![CDATA[Wooden gavel]]></dcterms:title>
    <dcterms:description><![CDATA[Varnished light wood gavel. Hand printed on the paper which is wrapped around the handle is the following inscription: &quot;THIS GAVEL PRESENTED TO THE CARPENTERS&#039; COMPANY BY JOSEPH JONES APRIL 1894 THE HEAD FROM A TREE BROUGHT FROM ENGLAND BY ELISABETH HADDON ABOUT 1713 HANDLE FROM WILLIAM PENN&#039;S HOUSE BUILT 1682.&quot;]]></dcterms:description>
    <dcterms:type><![CDATA[W. Penn gavel]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22391">
    <dcterms:title><![CDATA[Wooden gavel]]></dcterms:title>
    <dcterms:description><![CDATA[Wooden gavel- elongated barrel-shaped head with flat ends. Handle tapers then widens near the head. Three evenly divided cuts have been made around the circumference of the head. two cuts have been made half an inch apart around the circumference of the handle. Many scratches are visible in the handle and head of the gavel.]]></dcterms:description>
    <dcterms:type><![CDATA[gavel]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22403">
    <dcterms:title><![CDATA[Wooden handle, three-iron trammel points set in]]></dcterms:title>
    <dcterms:description><![CDATA[unusual Steel Marking Guage with wooden handle three scribing or mortising trammel points manufactured late 19th C. 8&quot; steel fence at top of stalk beneath handle]]></dcterms:description>
    <dcterms:date><![CDATA[late 19th C.]]></dcterms:date>
    <dcterms:type><![CDATA[trammel points]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22574">
    <dcterms:title><![CDATA[Wooden handled auger with 20&quot; long gimlet starter]]></dcterms:title>
    <dcterms:date><![CDATA[late 19th C.]]></dcterms:date>
    <dcterms:type><![CDATA[Auger]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22623">
    <dcterms:title><![CDATA[Wooden Level]]></dcterms:title>
    <dcterms:description><![CDATA[Wooden level, prob. cherry. Brass fittings/plates on both ends attached with flat-head screws. Multiple ]]></dcterms:description>
    <dcterms:date><![CDATA[Late 19th c. (see patent dates)]]></dcterms:date>
    <dcterms:type><![CDATA[Level]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22296">
    <dcterms:title><![CDATA[Wooden level. ]]></dcterms:title>
    <dcterms:description><![CDATA[Wooden level, reinforced with small steel plates on the ends and on one side. A device used for establishing a horizontal line or plane. tool, Stanley level, catalog # 3.. Board equipped with a small glass tube of alcohol or oil and a tiny air bubble floating in the center of the tube to show levelness; tool. This type of level was not readily adapted until after the Civil War. This particular level has two tubes of alcohol or oil, one parallel to the height of the level and one in the center, parallel to the length. Dark wood- cherry. On either side, there is an elongated oblong-shaped indentation in the center.]]></dcterms:description>
    <dcterms:type><![CDATA[spirit level]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22411">
    <dcterms:title><![CDATA[Wooden marking gauge.]]></dcterms:title>
    <dcterms:description><![CDATA[Early beech wood marking gauge with one metal scriber point.]]></dcterms:description>
    <dcterms:date><![CDATA[early 19th C.]]></dcterms:date>
    <dcterms:type><![CDATA[marking gauge]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22432">
    <dcterms:title><![CDATA[Wooden molding plane with metal blade and reinforced fluting sole. 1/8&quot; bead cut.]]></dcterms:title>
    <dcterms:description><![CDATA[Molding plane with rosewood boxing. Made by Israel White. F.K. Snow, owner. &quot;T.D.&quot; is mark of bench hand Thomas Donoho, then in White&#039;s shop, and later had his own shop (1854) specializing in bead planes.]]></dcterms:description>
    <dcterms:date><![CDATA[c. 1850&#039;s]]></dcterms:date>
    <dcterms:type><![CDATA[molding plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22180">
    <dcterms:title><![CDATA[Wooden plaque with parchment paper covering the front. the paper is hand-printed and contains large and small nails.]]></dcterms:title>
    <dcterms:description><![CDATA[Wooden plaque; Nails secured to the board with metal loops. some loops empty. Paper is discolored with age. All the nails are very rusty. Hand printed: &quot;WROUGHT FLOOR BRADS CARPENTERS&#039; HALL 177_ [last number is missing because parchment broke off] CUT SPRIGS CARPENTERS&#039; HALL 1857&quot;]]></dcterms:description>
    <dcterms:type><![CDATA[wooden plaque with nails]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22624">
    <dcterms:title><![CDATA[Wooden rabbet plane]]></dcterms:title>
    <dcterms:description><![CDATA[wooden rabbet plane. Blade is somewhat rusted. Tip of wedge is broken off. See measurements and markings Donated to the Company by Alfred L. MacMoran February 19, 1997.]]></dcterms:description>
    <dcterms:date><![CDATA[19th c. ?]]></dcterms:date>
    <dcterms:type><![CDATA[Rabbet Plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22625">
    <dcterms:title><![CDATA[Wooden Rabbet plane]]></dcterms:title>
    <dcterms:description><![CDATA[wooden plane with skewed blade. Blade somewhat rusty. Edges of body worn. Multiple dins and scratches throughout with stain wearing off in places. Large chunk of wood broken off the wedge. Donated to the Company by Alfred L. MacMoran February 19, 1997.]]></dcterms:description>
    <dcterms:date><![CDATA[19th c.?]]></dcterms:date>
    <dcterms:type><![CDATA[Rabbet Plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22053">
    <dcterms:title><![CDATA[Wooden rectangular table]]></dcterms:title>
    <dcterms:description><![CDATA[Wooden table; various iron nails on top, side; legs end in small wooden wheels; small devise underneath.]]></dcterms:description>
    <dcterms:type><![CDATA[table]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22402">
    <dcterms:title><![CDATA[Wooden ruler which folds in from two ends 3-foot rule]]></dcterms:title>
    <dcterms:description><![CDATA[Boxwood. Two foot, four fold boxwood and brass carpenter&#039;s arch joint by E.P. Preston 3-foot rule.]]></dcterms:description>
    <dcterms:date><![CDATA[early 20th C.]]></dcterms:date>
    <dcterms:type><![CDATA[3-foot rule]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22313">
    <dcterms:title><![CDATA[Wooden ruler with 1/16 of an inch / millimeter markings]]></dcterms:title>
    <dcterms:description><![CDATA[Ruler, numbers are painted onto the ruler in black]]></dcterms:description>
    <dcterms:type><![CDATA[triangular wooden ruler]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22498">
    <dcterms:title><![CDATA[Wooden scraper]]></dcterms:title>
    <dcterms:description><![CDATA[Beech wood scraper Brasss wearplate in front of cutter.]]></dcterms:description>
    <dcterms:type><![CDATA[scraper]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22497">
    <dcterms:title><![CDATA[Wooden scraper/ shaver]]></dcterms:title>
    <dcterms:description><![CDATA[Scraper or shaver; Beech wood. by Bagshaw &amp; Field, Phila.]]></dcterms:description>
    <dcterms:type><![CDATA[scraper/ shaver]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22500">
    <dcterms:title><![CDATA[Wooden scraper/ shaver]]></dcterms:title>
    <dcterms:description><![CDATA[Scraper or shaver; Beech wood. The scraper is missing its cutter.]]></dcterms:description>
    <dcterms:type><![CDATA[scraper/ shaver]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22675">
    <dcterms:title><![CDATA[Wooden shelving]]></dcterms:title>
    <dcterms:description><![CDATA[2 wooden shelves removed from library next to bathroom to accommodate the Egyptian collection of books c.2007]]></dcterms:description>
    <dcterms:type><![CDATA[wooden shelving]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22605">
    <dcterms:title><![CDATA[Wooden stone cutter&#039;s mallet with handle]]></dcterms:title>
    <dcterms:description><![CDATA[Beech stone cutter&#039;s mallet with handle. Made of wood, 7 accessioning sheets for tools for NBM [?]. <br />
<br />
Tools are set aside in storage room on right side.]]></dcterms:description>
    <dcterms:date><![CDATA[approx. 1838 or late 19thc.]]></dcterms:date>
    <dcterms:type><![CDATA[Mell or Mallet]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22679">
    <dcterms:title><![CDATA[Wooden storage box]]></dcterms:title>
    <dcterms:description><![CDATA[large, heavy wooden storage box with lid made by member of Company to store collograph prints of interior of Hall for centennial celebration in 1876. Prints removed from box in 2009 because acid changing quality of prints. no date for construction of box]]></dcterms:description>
    <dcterms:type><![CDATA[large wooden box]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22680">
    <dcterms:title><![CDATA[Wooden storage box]]></dcterms:title>
    <dcterms:description><![CDATA[large, heavy wooden storage box with lid made by member of Company to store collograph prints of exterior of Hall probably c.1876. Prints removed from box in 2009 because acid changing quality of prints. This box slightly larger than box a. no date for construction of box]]></dcterms:description>
    <dcterms:type><![CDATA[large wooden box]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22408">
    <dcterms:title><![CDATA[Wooden tool box ]]></dcterms:title>
    <dcterms:description><![CDATA[Wooden tool box with two hinges for saws inside the lid and with sectioned removable tray and metal handles.]]></dcterms:description>
    <dcterms:date><![CDATA[19th C.]]></dcterms:date>
    <dcterms:type><![CDATA[tool box]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22651">
    <dcterms:title><![CDATA[Wooden tool see below]]></dcterms:title>
    <dcterms:description><![CDATA[wooden tool has screw turn for a type of press and second press or drill]]></dcterms:description>
    <dcterms:type><![CDATA[wooden tool]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22412">
    <dcterms:title><![CDATA[Wooden trying plane]]></dcterms:title>
    <dcterms:description><![CDATA[Wooden trying plane with wooden handle and metal blade.]]></dcterms:description>
    <dcterms:type><![CDATA[trying plane]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/17277">
    <dcterms:title><![CDATA[Woods and By-Ways of New England]]></dcterms:title>
    <dcterms:creator><![CDATA[Flagg, Wilson]]></dcterms:creator>
    <dcterms:date><![CDATA[1872]]></dcterms:date>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/26104">
    <dcterms:title><![CDATA[Woods, James]]></dcterms:title>
    <dcterms:description><![CDATA[James Woods was a master builder of Philadelphia and was elected to the Carpenters' Company in 1834. He served as a Warden of the Company from 1850-1852 and on the Managing Committee from 1853-1855. According to the 1830 City Directory, he resided at 18 Ann Street. In addition to house carpentry, Woods also made wooden furniture.<br /><br />Biography from the <a href="https://www.philadelphiabuildings.org/pab/app/ar_display.cfm?ArchitectId=4C4CE516-155D-0A04-06BED3A3E7F313F8">Philadelphia Architects and Buildings</a>, a project of <a href="https://philaathenaeum.org/">the&nbsp;Athenaeum of Philadelphia</a>. Written by Tom Stokes]]></dcterms:description>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/19031">
    <dcterms:title><![CDATA[Woodward&#039;s Architecture, No. 1.]]></dcterms:title>
    <dcterms:creator><![CDATA[Woodward, George E. and F. W. Woodward.]]></dcterms:creator>
    <dcterms:date><![CDATA[1867]]></dcterms:date>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/21338">
    <dcterms:title><![CDATA[Woodward&#039;s Country Homes]]></dcterms:title>
    <dcterms:creator><![CDATA[Woodward, Geo. E. and F. W.]]></dcterms:creator>
    <dcterms:date><![CDATA[1865]]></dcterms:date>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/17315">
    <dcterms:title><![CDATA[Woodward&#039;s Graperies and Horticultural Buildings]]></dcterms:title>
    <dcterms:creator><![CDATA[Woodward, George E. and F. W.]]></dcterms:creator>
    <dcterms:date><![CDATA[1865]]></dcterms:date>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/22581">
    <dcterms:title><![CDATA[Woodworker&#039;s wooden clamp.]]></dcterms:title>
    <dcterms:description><![CDATA[threaded screw arm. maker&#039;s name illegible.]]></dcterms:description>
    <dcterms:type><![CDATA[clamp]]></dcterms:type>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/19542">
    <dcterms:title><![CDATA[Wooed and Married.]]></dcterms:title>
    <dcterms:creator><![CDATA[Carey, Rosa N.]]></dcterms:creator>
    <dcterms:date><![CDATA[1887]]></dcterms:date>
</rdf:Description><rdf:Description rdf:about="https://archive.carpentershall.org/items/show/19317">
    <dcterms:title><![CDATA[Wooing O&#039;T]]></dcterms:title>
    <dcterms:creator><![CDATA[Alexander, Mrs.]]></dcterms:creator>
    <dcterms:date><![CDATA[1874]]></dcterms:date>
</rdf:Description></rdf:RDF>
