Browse Items (11130 total)

Item type: twisted drill bits

Description: Published by Carpenters' Printing Plant, Indianapolis. Light green covered paperback booklet of 64 pages. Stamped on the cover in red ink, "David B. Walker." Printed on the cover: "Established August 12, 1881. Constitution as amended by The…
Item type: book

Description: Publishers- P.J. Collison & Co., Brooklyn, NY. Date: 1911. 152 pages. Accession number written on reverse side of title page and on page 66.
Item type: book

Description: threaded screw arm. maker's name illegible.
Item type: clamp

Description: some rust visible. point of bit not sharp.
Item type: twisted auger bit

Description: Steel blade, rosewood handle. Brass mitre and square edge. "D. Walker," owner's mark.
Item type: square

Item type: bits

Description: mahogany with brass fittings.
Item type: compass

Description: steel with wooden handles. conventional chuck. no legible maker's name.
Item type: bit brace

Description: The check is engraved with the following: -The dates of the institution (1724) and incorporation (1790) of the C. Co. -The name and address of the C. Co. -"To The Tradesmen National Bank and Trust Company." -There are spaces left for the date, the…
Item type: engraved silver plate

Description: There are three almost complete circles attached to the end of the key.
Item type: key

052_Carpenter's Hall_lg.jpg
053_Carpenter's Hall_lg.jpg
054_Carpenter's Hall_lg.jpg
057_Carpenter's Hall_lg.jpg
Description: Brass telescope that's been covered in canvas, stitched. with lens cover. Simple decoration around lenses and where canvas begins and ends. Pressure-sensitive tape around eyepiece end, discolored. Object includes framed certificate. see ccccp-88.2.2
Item type: telescope

Description: Mallet-headed scablar or boaster possibly iron. The tool is clearly octagonal with sharp edges. The tip flattened to cutting edge.
Item type: mallet-headed scablar or boaster

Description: Tool is possibly iron. It has a flat, round head and a flattened cylindrical body. The end of the tool flares to cutting edge.
Item type: mallet-headed scablar or boaster

Description: Blade for mallet-headed trimming. The blade itself has a double-sided cutting edge with ten teeth on either side.
Item type: blade for mallet-headed trimming

Description: Iron blade. Flare toward end. Roughly octagonal body and round head. Wedge-shaped end is slit to allow blades to be interchanged. There is a total of 10 teeth.
Item type: mallet-headed trimmings and blade

Description: blade for mallet-headed trimmingdouble-edged cutting tool. one edge broken- one tooth missing?
Item type: blade for mallet-headed trimming

Description: Blade for mallet-headed trimming; one edge is uneven / broken. There is a double-sided trimming blade.
Item type: blade for mallet-headed trimming

Description: Iron cutter. Mallet Headed, flat round head. Originally octagonal by the worn body has become almost round. End flares to wedge with slit for blade. Currently there is no blade.
Item type: mallet-headed trimming

Description: Punch possibly made of iron. Roughly octagonal body. very sharp edges at point. The punch tapers to four-sided point.
Item type: mallet-headed point or punch

Description: Iron scablar; flat round head. This tool has a roughly octagonal body flaming widely toward cutting edge. Additionally, it has an extremely asymmetrical cutting edge.
Item type: mallet-headed scablar or boaster

Description: Iron Boaster. Cutter with octagonal body flares to wide cutting edge. The tool has a flat, round head. One tip of cutting edge is missing.
Item type: mallet-headed scablars or boasters

Description: Cutting tool; iron. The tool has a roughly octagonal body. Likewise, it flares toward tip; creating a rough wedge-like tip. Flat round head.
Item type: mallet-headed margin or drafting tool.

Description: Cutting tool; possibly iron. The tool has a roughly octagonal body, a thin neck and a flat round head.
Item type: mallet-headed margin or drafting tool

Description: Drafting tool; possibly iron. The tool has a small, flat, round head and a cylindrical body. The drafting too flares toward tip. The tip could be described as wedge-like.
Item type: drafting tool.

Description: Cutter; possibly iron with a flat round head. Likewise, there is an octagonal upper body and a flattened cylindrical lower body. Finally, there is a wedge-like tip; mallet headed pt.
Item type: mallet headed pt.

Description: Cutter, possibly iron. The body has octagonal shape and a wedge-like tip. Small flat round head.
Item type: mallet-headed margin or drafting tool.

Description: Punch; possibly iron. The end of the tool flares to blunt wedge. Steel hammer headed pitching tool; punch
Item type: punch

Description: Punch, possibly iron. It is octagonal in shape with a slightly curved body. Tapers to 4-sided point.
Item type: steel hammer

Description: Iron punch. Octagonal body / shaft. The punch tapers to four-sided point. Round head.
Item type: mallet-headed point or punch

Description: Cutting tool, mallet headed; as if it was intended to be hit by a hammer. Internal mitring tool.
Item type: mitring tool

Description: iron, handworked mitring tool.
Item type: mallet headed inernal mitring tool

Description: Iron handworked mitring tool. The end tapers to asymmetrical wedge. The head is flat, as if it were meant to be hit by a hammer.
Item type: mallet-head internal mitring tool

Description: Mitring tool too used for iron cutting. The tool itself is nearly cylindrical. Likewise, it has a round head and tapered end (like a screwdriver).
Item type: mitring tool

Description: Brass Mason's Bevel. The nut-bolt-washer joint is possibly made of Steel.
Item type: mason's bevel

Description: Silk, rectangular flag; red, white, blue diagonal stripes eagle with key and sword in gold. Presented with a framed presentation placque (see CCCCP-078)
Item type: Flag

Description: Metal Calipers. They're held together by a circular hinge. The jaws of the calipers have inward facing prongs.
Item type: Calipers

Description: Plumb bob of cast iron. About 30% of the original black paint remains.
Item type: plumb bob

Description: hand wrought hinges
Item type: hinges

159_Carpenters' Hall.jpg
161_Carpenters' Hall.jpg
162_Carpenters' Hall.jpg
160_Carpenters' Hall.jpg
Description: chisel marked "Cast Steel, Young" by maker
Item type: chisel

Description: handled chisel by Buck Brothers.
Item type: chisel

Description: Double block pulley; possibly maritime, wooden.
Item type: pulley

Description: Steel and brass compass.Screw adjustment.
Item type: compass

Description: Molding plane made of Beech wood. Boxed. Manufactured by Greenfield Tool Co. Catalog #355
Item type: molding plane

Description: Molding plane; beech wood with brass fence. Sold by Dilworth & Branson, Philadelphia. Wedge finial missing.
Item type: molding plane

Description: Molding plane; beech wood. Nicely boxed. Sold by Field & Hardee, Philadelphia hardware distributors. 3/16 No 123 logo: FIELD & HARDIE 633 MARKET ST
Item type: molding plane

Description: Beech wood. Sold by Field & Hardie, Philadelphia hardware distributors.
Item type: molding plane

Description: Beech wood. Nicely boxed. Made by Auburn Tool Co. Molding plane, 0.375" center bead.
Item type: molding plane

Description: Molding plane made of Beech wood. By Greenfield Tool Co.
Item type: molding plane

Description: Scraper or shaver; Beech wood. The scraper is missing its cutter.
Item type: scraper/ shaver
Output Formats

atom, csv, dc-rdf, dcmes-xml, json, omeka-xml, rss2